Analysis of the stress-strain state of problematic sections of the shaft of the mine using computer simulation
https://doi.org/10.29235/1561-8323-2023-67-4-322-330
Abstract
The article presents the computer simulation results for the stress-strain state of the lining sections of the shaft No. 1 of mine 3 of JSC Belaruskali that were obtained using visual and instrumental investigation of the mine lining state. The loading parameters of the shaft take into account the specific feature of the lateral pressure calculation in the considered location. This means that the shaft intersects vertically rocks different in their physical and mechanical properties. Computer simulation of loading of the most problematic vertical mine shaft sections observed by the lining examination results was performed using the Static Structural component of the ANSYS Workbench engineering software package. Distribution diagrams of longitudinal normal, shear and von Mises equivalent stresses in the vertical mine shaft lining are obtained for the design and residual values of the cast-iron tubing thickness. A comparative analysis of the mine shaft residual bearing capacity for various parameters of the lining elements was carried out. Based on the computer simulation results, the conclusions were made on the bearing capacity of the shaft No. 1 of mine 3 of JSC Belaruskali and the recommendations for a further safe operation of the mine shaft were suggested.
About the Authors
D. A. Diulin
Trest Shahtospetsstroy
Belarus
Belarus
Diulin Denis A. – General Director
Soligorsk-4, 223710, Minsk Region
V. Y. Prushak
Soligorsk Institute of Resources Saving Problems with Pilot Production
Belarus
Belarus
Prushak Viktor Y. – Academician, D. Sc. (Engineering), Professor, Technical Director
69, Kozlov Str., 223710, Soligorsk, Minsk Region
M. G. Gegedesh
Belarusian State University of Transport
Belarus
Belarus
Gegedesh Maryna G. – Ph. D. (Engineering), Associate Professor
34, Kirov Str., 246653, Gomel
References
1. Olhovikov Yu. P. Lining of capital excavations of potash and salt mines. Мoscow, 1984. 238 p. (in Russian).
2. Alymenko D. N., Soloviev V. A., Aptukov V. N., Kotlyar E. K. The use of lightweight types of lining while maintaining shaft workings in salt rocks. Gornyi zhurnal, 2019, no. 5, pp. 42–45 (in Russian). https://doi.org/10.17580/gzh.2019.05.07
3. Tarasov V. V., Pestrikova V. S., Afanasiev I. A., Sushkov S. L. Revealing causes of deforming underground all-mine bunker lining. Izvestiya Tul’skogo gosudarstvennogo universiteta. Nauki o zemle = News of the Tula State University. Sciences of Earth, 2017, no. 1, pp. 133–144 (in Russian).
4. Bogatyr’ova I. V. Inspection and testing of structures of buildings and structures. Tomsk, 2015. 110 p. (in Russian).
5. Sergeev S. V., Vorobyev E. D., Frolov N. V. Mine shaft inspectation the trunk of mine operated in difficult engineeringgeological conditions. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V. G. Shukhova = Bulletin of BSTU named after V. G. Shukhov, 2017, no. 2, pp. 63–67 (in Russian).
6. Sergeev S. V., Kazikaev D. M. Diagnostics and monitoring of the stress state of the lining of vertical shafts. Moscow, 2011. 244 p. (in Russian).
7. Wang D., Yang W. Research on Monitoring of Coal Mine Shaft Deformation Based on Fiber Grating Technology. Journal of Physics: Conference Series, 2020, vol. 1549, no. 4, art. 042088. https://doi.org/10.1088/1742-6596/1549/4/042088
8. Moghaddam R. B., Belardo D. S., Piscsalko G., Likins G. Quality Control of Drilled Foundations for Base Cleanliness, Concrete Integrity, and Geometry. 10th International Conference on Stress Wave Theory and Testing Methods for Deep Foundations, 2019, pp. 223–237. https://doi.org/10.1520/stp161120170198
9. Hola J., Schabowicz K., Sadowski L. Evaluation of adhesion of concrete screed to mine shaft wall by means of nondestructive acoustic methods. Materials of the 19th World Conference on Non-Destructive Testing, 2016. 8 p.
10. Ilyin S. R., Dubinin M. V. Spectral and deformation analysis of systems “vessels–reinforcement” of vertical shafts. Geotechnical Mechanics. Dnepropetrovsk, 2015, vol. 122, pp. 164–193 (in Ukranian).
11. Glazounov V. V., Daniliev S. M. Application of the GPR method for investigetion of barring condition and outbarring spaces “Octyabr’skiy” mine. Zapiski Gornogo instituta = Journal of Mining Institute, 2011, vol. 189, pp. 15–18 (in Russian).
12. Igolka D. A. Possibilities of using 3D finite element modeling in the design of vertical mine shafts. Gornaya mekhanika i mashinostroenie = Mine Mechanical Engineering and Machine-Building, 2012, no. 1, pp. 40–46 (in Russian).
13. Seryakov V. M. Calculation of stress behavior of underground mining support considering its interaction with rock solid. Interekspo Geo-Sibir’ [Interekspo Geo-Syberia], 2019, vol. 2, no. 5, pp. 12–19 (in Russian).
14. Lv Z., Qin Q., Jiang B., Luan Y., Yu H. Comparative study on the mechanical mechanism of confined concrete supporting arches in underground engineering. Plos one, 2018, vol. 13, no. 2, art. e0191935. https://doi.org/10.1371/journal.pone.0191935
15. Pleshko M. S., Stradanchenko S. G., Maslennikov S. A., Pashkova O. V. Study of technical solutions to strengthen the lining of the barrel in the zone of influence of construction near-wellbore production. ARPN Journal of Engineering and Applied, 2015, vol. 10, no. 1, pp. 14–19.
16. Pashkova O. V. Justification of technical and technological solutions for the construction of near-shaft workings in passed vertical shafts. Novocherkassk, 2015. 145 p. (in Russian).
17. Georgiannou V. N., Serafis A., Pavlopoulou E. M. Analysis of a vertical segmental shaft using 2D&3D finite element codes. International Journa of GEOMATE, 2017, vol. 13, no. 36, pp. 138–146. https://doi.org/10.21660/2017.36.88132
18. Perform an analysis of the results of surveys of shaft lining, assess the need and scope of geophysical work in deformed areas. Minsk, 2009. 42 p. (in Russian).
19. Diulin D. A. Research of the Soligorsk vertical mine shafts. Gornaya mekhanika i mashinostroenie = Mine Mechanical Engineering and Machine-Building, 2021, no. 4, pp. 22–28 (in Russian).
20. Timoshenko S. P., Gudier G. Elasticity theory. Moscow, 1979. 560 p. (in Russian).
21. Baier V. E. Construction materials. Moscow, 2004. 240 p. (in Russian).
22. Rudnov V. S., Vladimirova E. V., Domanskaya I. K., Gerasimova E. S. Building materials and products. Ekaterinburg, 2018. 203 p. (in Russian).
Review
Views: 184
Email this article 