Increasing the densification efficiency in the manufacturing technologies of high-density carbon-carbon composite materials
https://doi.org/10.29235/1561-8323-2022-66-5-544-551
Abstract
Carbon-carbon composite materials (CCCM) are used in extreme environments due to their high-temperature erosion resistance, ablative resistance, and high mechanical performance at extremely high temperatures. The production of such materials includes several cycles of gas-phase or liquid-phase compaction of a porous reinforcement of carbon fibers. The article analyzes the main parameters and technological schemes of densification, and their role in manufacturing CCCM. Conditions of optimizing technological regimes and routes of multi-cycle densification for obtaining high-density CCCM with a minimum number of cycles are proposed. A method for calculating density and porosity changes during multi-cycle compaction of CCCM is developed. The accuracy of this method is confirmed by experimental data.
About the Authors
A. F. Ilyushchenko
O. V. Roman Powder Metallurgy Institute of the National Academy of Sciences of Belarus
Belarus
Ilyushchenko Alexander F. – Academician, D. Sc. (Engineering), Professor, Director
41, Platonov Str., 220005, Minsk
O. V. Roman Powder Metallurgy Institute of the National Academy of Sciences of Belarus
Belarus
Prokhorov Oleg A. – Ph. D. (Engineering), Associate Professor, Head of the Group
41, Platonov Str., 220005, Minsk
O. V. Roman Powder Metallurgy Institute of the National Academy of Sciences of Belarus
Belarus
Krivulenko Nikita V. – Head of the Sector
41, Platonov Str., 220005, Minsk
References
1. Morgan, P. Carbon fibers and their composites. Boca Raton, 2005. 1131 p. https://doi.org/10.1201/9781420028744
2. Trefilov V. I., ed. Ceramic- and Carbon-matrix Composite. London, 1995. 444 r. https://doi.org/10.1007/978-94-011- 1280-2
3. Golecki I. Rapid vapour-phase densification of refractory composites. Materials Science and Engineering: R: Reports, 1997, vol. 20, no. 2, rr. 37-124. https://doi.org/10.1016/s0927-796x(97)00003-x
4. Gurin V. A., Zelensky V. F. Gas-phase methods for fabrication of carbon and carbon-carbon materials. Voprosy atomnoi nauki i tekhniki [Questions of Atomic Science and Technology], 1999, no. 4(76), pp. 13-31 (in Russian).
5. Shchurik A. G. Artificial carbon materials. Perm, 2009. 342 p. (in Russian)
6. Ilyushchenko A. F., Andreev M. A., Prokhorov O. A., Suvorov A. N., Rosikhin M. I. Gas-phase densification of carbon-carbon composite materials in reactors with a radially moving pyrolysis zone. Poroshkovaya metallurgiya [Powder metallurgy]. Minsk, 2021, vol. 44, pp. 155-165 (in Russian).
Views: 410
Email this article 