Criterion for the occurrence of the macro destruction and formation of breaking during metal deformation

When generalizing the geometrically nonlinear law of Murnaghan elasticity to plasticity, a formally mathematical criterion was introduced for deformational macrofracture (macrocrack appearance) associated with an increase in elastic and plastic anisotropy as a failure cause. The use of the double potentiality of the governing equations in stresses and their velocities made it possible to obtain the reliable information on the structure of the deviatory section of the yield surface, the existence of which is a classical hypothesis in solid mechanics. The normal vector to the surface of the deviatory section is selected from two mutually orthogonal eigenvectors of the constructed operator. There are two families of regular concave surfaces, and a section surface is formed by joining the parts of two representatives of the families at singular points. To select normal vectors, the obtained ratio for them is used for isotropy. In connection with the considered problem of a double simple shift, it is established that multiple eigenvalues appear for the both normal vectors. To unambiguously determine the normal vector at a regular point, it is necessary to exclude the presence of multiple eigenvalues for the both normal vectors at the same time. At a singular point, the appearance of a multiple eigenvalue of one of the normal vectors is still unacceptable. These two conditions are necessary and sufficient to validate the governing equations of the generalized Murnaghan model. Otherwise, a macrocrack occurs. The theoretical construction is supported by the developed software complexes.

1. Fridman Ya. B., Gordeeva G. A., Zaitsev A. M. Structure and analysis of fractures. Moscow, 1960. 128 p. (in Russian).

2. Volegov P. S., Gribov D. S., Trusov P. V. Damage and Fracture: Review of Experimental Studies. Fizicheskaya mezomekhanika [Physical Mesomechanics], 2015, vol. 18, no. 3, pp. 11–24 (in Russian).

3. Botvina L. R. Destruction: kinetics, mechanisms, general laws. Moscow, 2008. 334 p. (in Russian).

4. Zhilin P. A. Mathematical theory of inelastic media. Uspekhi mekhaniki [Advances in mechanics], 2003, no. 4, pp. 3–36 (in Russian).

5. Shved O. L. Murnaghan’s elastoplastic material model. Mechanics of Solids, 2019, vol. 54, no. 5, pp. 819–831. https://doi.org/10.3103/s0025654419050169

6. Lurie A. I. Nonlinear theory elasticity. Moscow, 1980. 512 p. (in Russian).

7. Murnaghan F. D. Finite deformation of an elastic solid. New York, 1951. 140 p.

8. Shved O. L. Calculation of the criteria deviator and the vector of normal to the deviator section of the yield surface for the Murnaghan elastic-plastic material. Informatika = Informatics, 2019, vol. 16, no. 3, pp. 48–58 (in Russian).

9. Shved O. L. Calculation of change in state of Murnaghans elastic-plastic material under conditions of flow with known movement speeds. Informatika [Informatics], 2018, vol. 15, no. 4, pp. 59-70 (in Russian).

10. Shved O. L. Numerical modeling of a clean shift for perfectly elastic-plastic material (Murnaghan’s material). Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya fizika-technichnych navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 2019, vol. 64, no. 2, pp. 182–189 (in Russian). https://doi.org/10.29235/1561-8358-2019-64-2-182-189

11. Shved O. L., Tkachenko V. V. Numerical modeling of the Bridgman experience for elastic-plastic material of Murnaghan. Vestnik Voronezhskogo gosudarstvennogo universiteta. Seriya: Fizika. Matematika = Proceedings of Voronezh State University. Series: Physics. Mathematics, 2021, no. 1, pp. 125–135 (in Russian).

12. Pikul V. V. Applied Solid Mechanics. Moscow, 1989. 221 p. (in Russian).

13. Ilyushin A. A. On the postulate of plasticity. Prikladnaya matematika i mekhanika = Journal of Applied Mathematics and Mechanics, 1961, vol. 25, no. 3, pp. 503–507 (in Russian).