Design the technological process and equipment using fields and energy flows based on analysis of similarity criteria
https://doi.org/10.29235/1561-8323-2021-65-5-628-635
Abstract
It is shown that the use of transfer criteria for analysis of the formation processes of structures and phases significantly reduces the amount of experimental research in the design of technological process and equipment using fields and energy flows. It is proposed to use the ratios proportional to the criteria of heat and mass transfer, physicochemical interaction when controlling energy sources. It is shown that the modeling of the combined electromagnetic and thermomechanical effects in the design of technological process and equipment is based on the criteria of heat and mass transfer, electrical and physicochemical interaction, determines the main technological factors, and relates geometric and physical parameters, as well as mechanical quality parameters with the processing performance.
About the Authors
M. L. Kheifetz
Institute of Applied Physics of the National Academy of Sciences of Belarus, Minsk
Belarus
Belarus
Kheifetz Mikhail L. – D. Sc. (Engineering), Professor, Director
16, Akademicheskaya Str., 220072
V. S. Krutko
Open Joint Stock Company «NPO Center» of the National Academy of Sciences of Belarus
Belarus
Belarus
Krutko Vyacheslav S. – Head of Science and Innovative Development Department
19, Sharangovich Str., 220018, Minsk
N. L. Gretzkiy
Open Joint Stock Company «NPO Center» of the National Academy of Sciences of Belarus
Belarus
Belarus
Gretzkiy Nikolay L. – Head of Programs and Projects Support Departmen
19, Sharangovich Str., 220018, Minsk
References
1. Kheifetz M. L. Design process of combined processing. Moscow, 2005. 272 p. (in Russian).
2. Vasil’ev A. S., Dal’sky A. M., Klimenko S. A., Polonsky L. G., Kheifetz M. L., Yashcheritsyn P. I. Technological fundamentals of machine quality management. Moscow, 2003. 256 p. (in Russian).
3. Yashcheritsyn P. I., Averchenkov V. I., Kheifets M. L., Kukhta S. V. Analysis of the properties of ratios of technological solutions in designing combined methods of the treatment of materials. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2001, vol. 45, no. 3, pp. 106–109 (in Russian).
4. Gordienko A. I., Kozhuro L. M., Kheifetz M. L., Kukhta S. V. Use of analogy parameters for development of combined physical-chemical material processing methods. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2004, vol. 48, no. 4, pp. 107–110 (in Russian).
5. Yashcheritsyn P. I., Kheifets M. L., Kozhuro L. M., Chemisov B. P. Designing technological complexes of higheffective treatment of products on the basis of products multifactorial optimization. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 1997, vol. 41, no. 3, pp. 112–118 (in Russian).
6. Yashcheritsyn P. I., Kheifets M. L., Zeveleva E. Z., Akulovich L. M. Designing of mechatronic technological complexes of high-performance processing. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2003, vol. 47, no. 6, pp. 120–124 (in Russian).
7. Kheifetz M. L. Design of mechatronic technological complexes for traditional and additive manufacturing. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2020, vol. 64, no. 6, pp. 739–746 (in Russian). https://doi.org/10.29235/1561-8323-2020-64-6-739-746
8. Rusetsky A. M., Vityaz’ P. A., Kheifets M. L., Averchenkov V. I., Akulovich L. M. Theoretical bases of technological systems designing. Minsk, 2012. 239 p. (in Russian).
9. Rusetsky A. M., Vityaz’ P. A., Kheifets M. L., Danilov V. A., Kiselev R. A., Krut’ko V. S., Popok N. N., Klimenko S. A. Design and equipment of technological systems. Minsk, 2014. 316 p. (in Russian).
10. Rusetsky A. M., Averchenkov A. V., Averchenkov V. I., Akulovich L. M., Barashko O. G., Vityaz’ P. A., Kashtal’yan I. A., Pyn’kin A. M., Rodionova O. L., Svirskii D. N., Terekhov M. V., Kheifets M. L., Sheleg V. K. Automation and control in technological complexes. Minsk, 2014. 375 p. (in Russian).
11. Chizhik S. A., Vityaz’ P. A., Kheifets M. L., Borodavko V. I., Prement G. B. Ensuring the quality of products in technological complexes. Minsk, 2019. 248 p. (in Russian)..
12. Sviridenok A. I., Ignatovsky M. I., Sveklo I. Ph., Louis H., Stavrov V. P. Investigation of micro- and nano-geometry of the surface of polymethyl methacrylate treated with a water-drop jet. Trenie i iznos = Friction and Wear, 2003, vol. 24, no. 2, pp. 186–191 (in Russian).
13. Sviridenok A. I., Chizhik S. A., Louis H., Ignatovsky M. I. Micro- and nanogeometry and physicomechanical properties of eroded surfaces of polymethyl methacrylate. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2004, vol. 48, no. 2, pp. 98–102 (in Russian).
14. Telegin A. S., Shvydkiy V. S., Yaroshenko Yu. G. Heat and mass transfer. Moscow, 1995. 400 p. (in Russian).
15. Grigoriev V. A., Zorin V. M., eds. Theoretical foundations of heat engineering. Heat engineering experiment. Moscow, 1988. 560 p. (in Russian).
Review
Views: 615
Email this article 