Schemes for locating and fixing the object in self-centering mechanisms with a set of hidden bases
https://doi.org/10.29235/1561-8323-2022-66-6-631-637
Abstract
The updated provisions of the basing theory and the updated composition of the bases are given: installation, guide, support, double guide, double support, and triple support. Base combinations form five sets, each of which can be implemented using explicit or hidden bases or their combinations. It is shown that basing an object with sets of hidden bases causes the greatest difficulties, and a feature of basing an object with hidden bases is determining the position of reference points using the contact points of the object, implemented by the installation elements. When basing an object with a hidden base, the position of the reference point is determined by a self-centering mechanism using the points of contact with the basing object. Various schemes of constructive solutions for basing and fixing objects in sets of hidden bases in self-centering mechanisms are considered.
About the Authors
B. M. Bazrov
Institute of Machine Science of the Russian Academy of Sciences
Russian Federation
Russian Federation
Boris M. Bazrov – D. Sc. (Engineering), Professor, Head of the Laboratory, Institute of Machine Science of the Russian Academy of Sciences.
4, M. Kharitonievsky Per., 101990, Moscow
N. A. Rodionova
Institute of Machine Science of the Russian Academy of Sciences
Russian Federation
Russian Federation
Nataliya A. Rodionova – Ph. D. (Engineering), Researcher, Institute of Machine Science of the Russian Academy of Sciences.
4, M. Kharitonievsky Per., 101990, Moscow
M. L. Kheifetz
Institute of Applied Physics of the National Academy of Sciences of Belarus
Belarus
Belarus
Mikhail L. Kheifetz – D. Sc. (Engineering), Professor, Director, Institute of Applied Physics of the National Academy of Sciences of Belarus.
16, Akademicheskaya Str., 220072, Minsk
V. L. Gurevich
Belarussian State Institute of Metrology
Belarus
Belarus
Valery L. Gurevich – Ph. D. (Engineering), Associate Professor, Director, Belarussian State Institute of Metrology.
93, Starovilenskiy Τract, 220053, Minsk
References
1. Vityaz P. A., Kheifetz M. L., Chizhik S. A. «Industry 4.0»: from information and communication and additive technologies to self-reproduction of machines and organisms. Vestsi Natsyyanal’nai akademii navuk Belarusi. Seryya fizika-technichnych navuk = Proceedings of the National Academy of Sciences of Belarus. Physical-technical series, 2017, no. 2, pp. 54–72 (in Russian).
2. Rusetsky A. M., ed. Theoretical bases of technological systems designing. Minsk, 2012. 239 p. (in Russian).
3. Rusetsky A. M., ed. Design and equipment of technological systems. Minsk, 2014. 316 p. (in Russian).
4. Gibson I., Rosen D., Stuker B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. New York, 2015. 498 p. https://doi.org/10.1007/978-1-4939-2113-3
5. Froes F., Boyer R., eds. Additive Manufacturing for the Aerospace Industry. Cambridge, 2019. 465 p. https://doi.org/10.1016/C2017-0-00712-7
6. Kolesov I. M. Fundamentals of Engineering Technique. Moscow, 1999. 591 p. (in Russian).
7. Bazrov B. M. Fundamentals of Engineering Technique. Moscow, 2005. 736 p. (in Russian).
8. Bazrov B. M. Modular technology in mechanical engineering. Moscow, 2001. 368 p. (in Russian).
9. Kolybenko E. N. System knowledge of the theory of basing in mechanical engineering. Vestnik Mashinostroenia [Engineering Proceedings], 2004, no. 6, pp. 58–62; no. 8, pp. 67–70 (in Russian).
10. Abramov F. N. Effect of form inaccuracy and of location surface positional relationship on the basing precision of base-superpositioned prismatic blanks. Vestnik Mashinostroenia [Engineering Proceedings], 2007, no. 7, pp. 54–64 (in Russian).
11. Novosiolov Yu. A. System analysis of basing logic. Vestnik Mashinostroenia [Engineering Proceedings], 2007, no. 3, pp. 62–67 (in Russian).
12. Bazrov B. M., Kheifetz M. L. Method of presenting a product as an object of digitalization of manufactoring by a structured set of modules. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2019, vol. 63, no. 3, pp. 377–384 (in Russian). https://doi.org/10.29235/1561-8323-2019-63-3-377-384
13. Bazrov B. M., Kheifetz M. L. Improvement bases of the theory basing with account for the development of traditional and additive technologies. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2020, vol. 64, no. 5, pp. 617–623 (in Russian). https://doi.org/10.29235/1561-8323-2020-64-5-617-623
14. Bazrov B. M., Kheifetz M. L. Layout synthesis based on the modular principle of the element base of mechatronic technological complexes. Doklady Natsional’noi akademii nauk Belarusi = Doklady of the National Academy of Sciences of Belarus, 2022, vol. 66, no. 2, pp. 229–236 (in Russian). https://doi.org/10.29235/1561-8323-2022-66-2-229-236
Review
Views: 323
Email this article 