Structural-phase states and micromechanical properties of nanostructured TiAlCuN coatings

TiAlCuN coatings were deposited by reactive magnetron sputtering on substrates of single-crystal silicon, and Titanium Grade2 wafers. To control and manage the coating deposition process by reactive magnetron sputtering, a previously developed modular gas flow control complex (MGFCC) was used. The elemental composition was studied by energy-dispersive X-ray spectroscopy (EDX). The structural-phase state of coatings was examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Mechanical properties, such as hardness and Young’s modulus, were investigated by the nanoindentation using a CSM Instruments Nanohardness Tester NHT2 (Switzerland). The influence of deposition parameters such as: Ti and Al content, reactivity degree α, and nitride concentration on structure and mechanical properties was considered. It was found that a decrease in the reactivity degree α from 0.605 to 0.474 leads to a 23 % increase in the deposition rate of TiAlCuN coating. It was detected that adding Cu to the coating content decreases the mean sizes of crystallites and growth columns in comparison with the TiAlN analogues due to its segregation along crystalline boundaries and thus advances better mechanical characteristics. The hardness of TiAlCuN coatings varies in the range of H = 29.3–35.4 GPa, Young’s modulus E = 235.9–267.6 GPa. The impact strength index as the H / E∗ ratio and the plastic deformation resistance index H3 / E∗2 were calculated. The formed nitride coatings are suitable for use in space technologies.

1. Vityaz P. A., Svidunovich N. A., Kuis D. V. Nanomaterials science. Minsk, 2015. 511 p. (in Russian).

2. Komarov F. F., Konstantinov S. V., Zaikov V. A., Pil’ko V. V. Effects of Protone Irradiation on the Structural-Phase State of Nanostructured TiZrSiN Coatings and Their Mechanical Properties. Journal of Engineering Physics and Thermophysics, 2021, vol. 94, no. 6, pp. 1609–1618. https://doi.org/10.1007/s10891-021-02442-2 110

3. Li X., Li G., Lü W., Liu S., Li C., Wang Q. Controllable high adhesion and low friction coefficient in TiAlCN coatings by tuning the C/N ratio. Applied Surface Science, 2022, vol. 597, pp. 153542. https://doi.org/10.1016/j.apsusc.2022.153542

4. Tillmann W., Grisales D., Stangier D., Thomann C., Debus J., Nienhaus A., Apel D. Residual stresses and tribomechanical behaviour of TiAlN and TiAlCN monolayer and multilayer coatings by DCMS and HiPIMS. Surface and Coatings Technology, 2021, vol. 406, pp. 126664. https://doi.org/10.1016/j.surfcoat.2020.126664

5. Komarov F. F., Konstantinov S. V., Żuk J., Droździel A., Pyszniak K., Chizhov I. V., Zaikov V. A. Structure and mechanical properties of TiAlN coatings under high-temperature Ar+ ion irradiation. Acta Physica Polonica A., 2022, vol. 142, no. 6, pp. 690– 696. http://doi.org/10.12693/aphyspola.142.690

6. Komarov F. F., Konstantinov S. V., Strel’nitskij V. E., Pilko V. V. Effect of Helium ion irradiation on the structure, the phase stability, and the microhardness of TiN, TiAlN, and TiAlYN nanostructured coatings. Technical Physics, 2016, vol. 61, no. 5, pp. 696–702. https://doi.org/10.1134/s106378421605011x

7. Cavaleiro A., De Hosson J. T. M., eds. Nanostructured Coatings. Berlin, 2006. 648 p. https://doi.org/10.1007/978-0-387-48756-4

8. Jyothi J., Biswas A., Sarkar P., Soum-Glaude A., Nagaraja H. S., Barshilia H. C. Optical properties of TiAlC/TiAlCN/ TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber coatings by phase-modulated spectroscopic ellipsometry. Applied Physics A, 2017, vol. 123, no. 7, art. 496. https://doi.org/10.1007/s00339-017-1103-2

9. Brogren M., Harding G. L., Karmhag R., Ribbing C. G., Niklasson G. A., Stenmark L. Titanium-aluminum-nitride coatings for satellite temperature control. Thin Solid Films, 2000, vol. 370, no. 1–2, pp. 268–277. https://doi.org/10.1016/s0040-6090(00)00914-7

10. Mejía H. D. V., Perea D., Gilberto Bejarano G. Development and characterization of TiAlN (Ag, Cu) nanocomposite coatings deposited by DC magnetron sputtering for tribological applications. Surface and Coatings Technology, 2020, vol. 381, art. 125095. https://doi.org/10.1016/j.surfcoat.2019.125095

11. Chen L., Pei J., Xiao J., Gong J., Sun C. TiAlN/Cu nanocomposite coatings deposited by filtered cathodic arc ion plating. Journal of Materials Science & Technology, 2017, vol. 33, no. 1, pp. 111–116. https://doi.org/10.1016/j.jmst.2016.07.018

12. Salvo C., Chicardi E., Hernández-Saz J., Aguilar C., Gnanaprakasam P., Mangalaraja R. V. Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing. Materials Characterization, 2021, vol. 171, art. 110812. https://doi.org/10.1016/j.matchar.2020.110812

13. Klimovich I. M., Kuleshov V. N., Zaikov V. A., Burmakov A. P., Komarov F. F., Ludchik O. R. Gas flow control system in reactive magnetron sputtering technology. Instruments and Measurement Methods, 2015, vol. 6, no. 2, pp. 139–147.

14. Konstantinov S. V., Wendler E., Komarov F. F., Zaikov V. A. Radiation tolerance of nanostructured TiAlN coatings under Ar+ ion irradiation. Surface and Coatings Technology, 2020, vol. 386, art. 125493. https://doi.org/10.1016/j.surfcoat.2020.125493

15. Oliver W. C., Pharr G. M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research, 2004, vol. 19, no. 1, pp. 3–20. https://doi.org/10.1557/ jmr.2004.19.1.3

16. Samsonov G. V., Vinitsky I. M. Refractory compounds. 2nd ed. Moscow, 1976. 560 р. (in Russian).

17. Komarov F. F., Konstantinov V. M., Kovalchuk A. V., Konstantinov S. V., Tkachenko H. A. The effect of steel substrate prehardening on structural, mechanical, and tribological properties of magnetron sputtered TiN and TiAlN coatings. Wear, 2016, vol. 352–353, pp. 92–101. https://doi.org/10.1016/j.wear.2016.02.007

18. Leyland A., Matthews A. Design criteria for wear-resistant nanostructured and glassy-metal coatings. Surface and Coatings Technology, 2004, vol. 177–178, pp. 317–324. https://doi.org/10.1016/j.surfcoat.2003.09.011

19. Musil J. Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness. Surface and Coatings Technology, 2012, vol. 207, pp. 50–65. https://doi.org/10.1016/j.surfcoat.2012.05.073