STRENGTHENING FOR STEELS AT DIFFUSION SATURATION BY CARBIDE-FORMING METALS
Abstract
The structure and properties of steels subjected to thermochemical heat treatment in multi-carbide forming media are studied. As a result, two types of composite structures are formed. Regularities in the formation of diffusion multi-carbide coatings are established. New models of complex diffusion saturation of steel by transition metals is proposed on the basis of thermodynamics and kinetics.
About the Authors
P. A. Vitiaz
National Academy of Sciences of Belarus
Belarus
Academician, D. Sc. (Engineering), Proffesor
Belarus
Academician, D. Sc. (Engineering), Proffesor
A. A. Shmatov
Belarusian National Technical University
Belarus
Ph. D. (Engineering), Assistant Professor, Leading researcher
Belarus
Ph. D. (Engineering), Assistant Professor, Leading researcher
O. G. Devoino
Belarusian National Technical University
Belarus
D. Sc. (Engineering), Proffesor, Chief researcher
Belarus
D. Sc. (Engineering), Proffesor, Chief researcher
References
1. Fetisov G. P., Garifullin F. A. Materials science and the technology of metals. Moscow, ONIKS Publ., 2007. 624 p. (in Russian)
2. Voroshnin L. G., Shmatov A. A., Khina B. B., Bashlak S. D. Multicomponent diffusional carbide coatings on iron-carbon alloys. Minsk, BNTU, 2007. 470 p. (in Russian)
3. Shmatov A. A. Formation of the diffusional Cr–Ti–V carbide coating on steel. Vestnik Brestskogo gosudarstvennogo tekhnicheskogo universiteta. Mashinostroenie [Proceedings of the Brest State Technical University. Engineering Series], 2010, no. 4, pp. 7–13. (in Russian)
4. Shmatov A. A. Formation of the diffusional Cr–Ti–V layer on steel. Vestn. Gomel’skogo gosudarstvennogo tekhnicheskogo universiteta imeni P. O. Sukhogo [Bulletin of Gomel State Technical University named after P. O. Sukhoi], 2010, no. 4, pp. 69–80. (in Russian)
5. Shmatov A. A. Modelining of the process of formation of the diffusional Ti–V carbide coating on steel U8. Vestnik Polotskogo gosudarstvennogo universiteta. Seriia Promyshlennost’. Prikladnye nauki �[Herald of Polotsk State University. Series B. Industry. Ap-[Applied sciences], 2011, no. 3, pp. 95–102. (in Russian)
6. Shmatov A. A. Modeling of the process of formation of the carbide layer during diffusional chrome-vanadium processing of steel Y8. Vestnik Polotskogo gosudarstvennogo universiteta. Seriia Promyshlennost’. Prikladnye nauki [Herald of Polotsk State University. Series B. Industry. Applied sciences], 2011, no. 11, pp. 113–122. (in Russian)
7. Lakhtin Yu. M., Leont’eva V. P. Materials scinece. 3d ed. Moscow, Mashinostroenie Publ., 1990. 528 p. (in Russian)
8. Prikhod’ko V. M., Petrova L. G., Chudina O. V. Metal physical fundamentals of reinforcement technologies. Moscow, Mashinostroenie Publ., 2003. 384 p. (in Russian)
9. Arzamasov B. N., Makarova V. I., Mukhin G. G., Ryzhov N. M., Silaeva V. I. Materials science. Moscow, Bauman Moscow State Technical University, 2005. 648 p. (in Russian)
10. Vereschaka A. S., Tret’yakov I. P. Cutting instruments with wear resistant coatings. Moscow, Mashinostroenie Publ., 1986. 192 p. (in Russian)
11. Scherba V. Ya., Lisovskii A. L. New composite materials. Novopolotsk, Polotsk State University, 2009. 220 p. (in Russian)
12. Antonyuk V. S., Lyashenko B. A., Soroka Ye. B. Choice of the parameters of coatings of discrete structure when reinforcing the surface of a cutting instrument. Uprochniaiushchie tekhnologii i pokrytiia [Strengthening technologies and coatings], 2005, no. 3, pp. 28–39. (in Russian)
13. Lygdenov B. D. Phase conversions in gradient-structure steels produced by the chemical-thermal and chemical-thermocyclic processing. Novokuznetsk, 2004. 226 p. (in Russian)
14. Shmatov A. A., Zhavnerko G. K., Lisovskaya Yu. O. Formation of the composite structure during the thermohydrochemical processing of steel. Materialovedenie [Materials science], 2013, no. 1, pp. 43–50. (in Russian)
15. Vityaz P. A., Shmatov A. A., Devoino O. G. Strengthening of high speed and stamp steels by the thermocycling heat treatment method. Doklady Natsional’noi akademii nauk Belarusi [Doklady of the National Academy of Sciences of Belarus], 2014, vol. 58, no. 4, pp. 101–105. (in Russian)
Review
Views: 932
Email this article 