Steel surface protection with coatings based on polyurethane and silicon organic compounds
https://doi.org/10.29235/1561-8323-2020-64-1-50-54
Abstract
Coatings of oligomethylsiloxane resin (OMES) and hydrolyzed heptadecafluorotetrahydrodecyltrimethoxysi-lane (HFS) oligomers were obtained by the spin-coating method on polyurethane (PU) - modified steel substrates. Their wettability and tribological properties were studied. It was found that the modification of the PU layer with silicon organic compounds increases its hydrophobicity and wear resistance. The water contact angles are 63.1° for a PU coating, 81.2° for PU/OMES and 115.8° for PU/HFS.
Supporting agencies: This work was financially supported by the Belarusian Republican Foundation for Fundamental Research (project no. Х19ВА-004) and the Vietnamese Academy of Sciences and Technologies (agreement no. QTBY02.01/19-20)
About the Authors
A. E. Salamianski
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
Belarus
Belarus
Salamianski Aliaksandr E. - Ph. D. (Chemistry), Leading researcher.
36, F. Skorina Str., 220141, Minsk
V. E. Agabekov
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
Belarus
Belarus
Agabekov Vladimir E. - Academician, D. Sc. (Chemistry), Professor, Director.
36, F. Skorina Str., 220141, Minsk
I. G. Chishankov
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
Belarus
Belarus
Chishankov Ignat G. - Junior researcher.
36, F. Skorina Str., 220141, Minsk
Yu. V. Matveenko
Institute of Chemistry of New Materials, National Academy of Sciences of Belarus
Belarus
Belarus
Matveenko Yuri V. - Ph. D. (Chemistry), Senior researcher.
36, F. Skorina Str., 220141, Minsk
G. B. Melnikova
A. V. Luikov Heat and Mass Transfer Institute, National Academy of Sciences of Belarus
Belarus
Belarus
Melnikova Galina B. - Ph. D. (Engineering), Senior researcher.
15, P. Brov-ka Str., 220072, Minsk
Thi Xuan Hang To
Institute for Tropical Technology, Vietnam Academy of Science and Technology
Viet Nam
Viet Nam
Tu Thi Huang Hang - Ph. D. (Engineering), Leading researcher.
18 Hoang Quoc Viet, Cau Giay, Hanoi
Thuy Duong Nguyen
Institute for Tropical Technology, Vietnam Academy of Science and Technology
Viet Nam
Viet Nam
Nguyen Than Duong - Ph. D. (Engineering), Researcher.
18 Hoang Quoc Viet, Cau Giay, Hanoi
Ke Oanh Vu
Institute for Tropical Technology, Vietnam Academy of Science and Technology
Viet Nam
Viet Nam
Wu Ke Oanh - Ph. D. (Engineering), Head of the Laboratory.
18 Hoang Quoc Viet, Cau Giay, Hanoi
Dai Lam Tran
Institute for Tropical Technology, Vietnam Academy of Science and Technology
Viet Nam
Viet Nam
Tran Dai Lam - Ph. D. (Engineering), Director.
18 Hoang Quoc Viet, Cau Giay, Hanoi
References
1. Zhang S., Zhao D. Aerospace Materials Handbook. London, 2012. 781 p.
2. Hao J. Self-Assembled Structures: Properties and Applications in Solu-tion and on Surfaces. London, 2010. 236 p. https://doi.org/10.1201/b10479
3. Nguyen Thuy Duong, To Thi Xuan Hang, Arnaud Nicolay, Yoann Paint, Marie-Georges Olivier. Corrosion protection of carbon steel by solvent free epoxy coating containing hydrotalcites intercalated with different organic corrosion inhibitors. Progress in Organic Coatings, 2016, vol. 101, pp. 331-341. https://doi.org/10.10167j.porgcoat.2016.08.021
4. Somarathna H. M. C. C., Raman S. N., Mohotti D., Mutalib A. A., Badri K. H. The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review. Construction and Building Materials, 2018, vol. 190, pp. 995-1014. https://doi.org/10.1016/j.conbuildmat.2018.09.166
5. Nistico R., Scalarone D., Magnacca G. Sol-gel chemistry, templating and spin-coating deposition: A combined approach to control in a simple way the porosity of inorganic thin films/coatings. Microporous andMesoporousMaterials, 2017, vol. 248, pp. 18-29. https://doi.org/10.1016/j.micromeso.2017.04.017
6. Yousefi E., Reza Ghadimi M., Amirpoor S., Dolati A. Preparation of new superhydrophobic and highly oleophobic polyurethane coating with enhanced mechanical durability. Applied Surface Science, 2018, vol. 454, pp. 201-209. https://doi.org/10.1016/j.apsusc.2018.05.125
7. Lisovskaya G. B., Chizhik S. A., Salamianski A. E., Agabekov V. E., Zhavnerko G. K. Modeling of the process of superhydrophobic surface formation. Twelfth International Workshop on Nanodesign Technology and Computer Simulations, 2009, vol. 7377, pp. 737716-1-737716-5. https://doi.org/10.1117/12.837073
8. Yong J., Chen F., Yang Q., Huo J., Hou X. Superoleophobic surfaces. Chemical Society Reviews, 2017, vol. 46, pp. 4168-4217. https://doi.org/10.1039/c6cs00751a
9. Komkov O. Yu. Reciprocating calf meter working in the field of light loads: design features and test methods. Trenie i iznos = Journal of Friction and Wear, 2003, vol. 24, no. 6, pp. 642-648 (in Russian).
10. Salamianski A. E., Zhavnerko G. K., Agabekov V. E. Tribological behavior of composite Langmuir-Blodgett films of triacontanoic acid. Surface & Coatings Technology, 2013, vol. 227, pp. 62-64. https://doi.org/10.1016/j.surfcoat.2013.02.024
Review
Views: 830
Email this article 