Preview

Doklady of the National Academy of Sciences of Belarus

Advanced search

Radiation tolerance of nanostructured TiZrSiN coatings

https://doi.org/10.29235/1561-8323-2020-64-5-534-543

Abstract

Nanostructured TiZrSiN coatings were formed on various types of substrates in regimes with a lack and stoichiometric nitrogen concentration using reactive magnetron sputtering. Using the methods of scanning electron microscopy and X-ray diffraction, the structural-phase state of the initial coatings, their thickness, and morphology were investigated. Nanoindentation tests according to the methods of Oliver and Farr, as well as tribomechanical tests were performed to determine hardness, Young's modulus and friction coefficient of the TiZrSiN coatings. The TiZrSiN coatings were irradiated with hydrogen ions H+ with an energy of 500 keV in the fluence range from 1 • 1016 to 1 • 1017 ions/cm2 on the AN 2500 accelerator complex. It was found that TiZrSiN nanostructured coatings deposited in nitrogen deficiency and stoichiometry regimes are radiation-resistant and potentially promising for use as protective on the bodies of small aircraft in orbit of the Earth and in open space.

About the Authors

F. F. Komarov
A.N. Sevchenko Institute of Applied Physical Problems of the Belarusian State University; National University of Science and Technology MISiS
Belarus

Komarov Fadey F. - Corresponding Member, D. Sc. (Physics and Mathematics), Professor, Head of the Laboratory, A.N. Sevchenko Institute of Applied Physical Problems of Belarusian State University.
7, Kurchatov Str., 220045, Minsk.



S. V. Konstantinov
A.N. Sevchenko Institute of Applied Physical Problems of the Belarusian State University
Belarus

Konstantinov Stanislav V. - Ph. D. (Physics and Mathematics), Senior researcher, A.N. Sevchenko Institute of Applied Physical Problems of Belarusian State University .
7, Kurchatov Str., 220045, Minsk.



V. A. Zaikov
Belarusian State University
Belarus

Zaikov Valery A. - Senior lecturer, Belarusian State University.
1, Kurchatov Str., 220045, Minsk.



V. V. Pilko
A.N. Sevchenko Institute of Applied Physical Problems of the Belarusian State University
Belarus

Pilko Vladimir V. - Junior researcher, A.N. Sevchenko Institute of Applied Physical Problems of Belarusian State University.
7, Kurchatov Str., 220045, Minsk.



References

1. Belous A. I., Soloduha V. A., Shvedov S. V. The Space Electronics. Moscow, 2015, vol. 1. 696 p. (in Russian).

2. Gushchin V. N. The basics of the device of spacecraft. Moscow, 2003. 272 p. (in Russian).

3. Komarov F. F., Pil'ko V. V., Klimovich I. M. Influence of Conditions Employed in Application of Ti-Zr-Si-N Nanostructured Coatings on their Composition, Structure, and Tribomechanical Properties. Journal of Engineering Physics and Thermophysics, 2015, vol. 88, no. 2, pp. 358-363. https://doi.org/10.1007/s10891-015-1200-z

4. Klimovich I. M., Kuleshov V. N., Zaikou V. A., Burmakou A. P., Komarov F. F., Ludchik O. R. Gas flow control system in reactive magnetron sputtering technology. Pribory i metody izmerenii = Devices and Methods of Measurements, 2015, vol. 6, no. 2, pp. 139-147 (in Russian).

5. Frank W., ed. Powder diffraction file. Alphabetical index inorganic compounds. Pennsylvania, 1977. 859 p.

6. Oliver W. C., Pharr G. M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research, 1992, vol. 7, no. 6, pp. 1564-1583. https://doi.org/10.1557/jmr.1992.1564

7. Oliver W. C., Pharr G. M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research, 2004, vol. 19, no. 1, pp. 3-20. https://doi.org/10.1557/jmr.2004.19.1.3

8. Kiryukhantsev-Korneev F. V., Kuptsov K. A., Sheveiko A. N., Levashov Ye. A., Shtansky D. V. Wear-resistant Ti-Al-Si-C-N coatings obtained by magnetron sputtering of SHS targets. Izvestiya vuzov. Poroshkovaya metallurgiya i funkt-sional'nye pokrytiya [Bulletin of Higher Educational Institutions. Powder metallurgy and functional coatings], 2011, no. 3, pp. 22-27 (in Russian).

9. Gorelik S. S., Skakov Yu. A., Rastorguev L. N. X-ray and electron-optical analysis. 3rd ed. Moscow, 1994. 328 p. (in Russian).

10. Saladukhin I. A., Abadias G., Michel A., Uglov V. V., Zlotski S. V., Dub S. N., Tolmachova G. N. Structure and hardness of quaternary TiZrSiN thin films deposited by reactive magnetron co-sputtering. Thin Solid Films, 2015, vol. 581, pp. 25-31. https://doi.org/10.1016/j.tsf.2014.11.020

11. Uglov V. V., Abadias G., Zlotski S. V., Saladukhin I. A., Skuratov V. A., Leshkevich S. S., Petrovich S. Thermal stability of nanostructured TiZrSiN thin films subjected to helium ion irradiation. Nuclear Instruments and Methods in Physical Research Section B, 2015, vol. 354, pp. 264-268. https://doi.org/10.1016/j.nimb.2014.12.043

12. Rusakov A. A. Radiography of metals. Moscow, 1977. 480 p. (in Russian).

13. Cavaleiro A., De Hosson J. T. M., eds. Nanostructured Coatings. Berlin, 2006. https://doi.org/10.1007/978-0-387-48756-4

14. Komarov F. F., Konstantinov V. M., Kovalchuk A. V., Konstantinov S. V., Tkachenko H. A. The effect of steel substrate pre-hardening on structural, mechanical, and tribological properties of magnetron sputtered TiN and TiAlN coatings. Wear, 2016, vol. 352-353, pp. 92-101. https://doi.org/10.1016/j.wear.2016.02.007


Review

Views: 752


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1561-8323 (Print)
ISSN 2524-2431 (Online)